Wisefab Toyota GT86 - Rear kit

Wisefab Toyota GT86 - Rear kit

Passar: Toyota GT86

Om du inte är hemma vad Wisefab "Lock kit" är så är det styrvinkel kit utvecklade rent för Drifting om du vill ha det värsta på marknaden så är detta nått för dig!

Info på eng:

Toyota GT86 Wisefab rear suspension kit to provide maximum grip on lowered car with major weight reduction

 
• Revised kinematics.
Toyota GT86 / Subaru BRZ is a well designed car for enthusiast driver. The car performs well on streets and can be taken to a race track. If the focus is more towards performance, then the car can act even better with lowered ride height, but then the factory designed kinematics wouldn’t work as it supposed to. The Wisefab kit would give a good kinematics with lowered car - higher roll center, lowered antisquat, revised cambergain and bumpsteer for maximum grip. 

 

• 14 kg of weight reduction over original components and still maintaining required strength and stiffness

 

7075-T6 aluminium billet CNC rear upright with optimized design and all double shear connections provide low weight and high strenght.
High strenght steel links and arms.
CrMo rod ends and sphericals used instead of rubber bushings
• Adjustable spring and shock absorber motion ratio
The shock has 3 attachment possibilities on rear arm, which allow to change suspension stiffness and handling very quickly without changing the spring and messing up ride heights. This option gives about 20% wheelrate adjustment range.
• Easy camber adjustment
Camber shims are used for adjustment
• Bump steer adjustment
Possibility to adjust bumpsteer by changing washer locations.

 

• Other components
Hub to hub length (track) is the same as original, as this is defined by halfshaft lengths.
This kit assumes coilovers to adjust ride height
Original wheel speed sensor can be used
Possibility to use Nissan S-Chassis hub with bigger CV joint.
Minimum rim size is 17“