• 0 Item
  • 0224-12330 mån-tis 10:00-18:00 ons-fre 10:00-16:00
  • Email

Välkommen till BadAssParts

Siemens Deka Mototron 875cc Spridare 110324 FI114992 - Hög ohm

Bli först med att recensera denna produkt

Leveranstid: 1-3 dagar

745 kr
ELLER

Beskrivning

Siemens Deka Mototron 875cc Spridare 110324 FI114992 - Hög ohm

Siemens Deka Mototron 875cc Spridare 110324 FI114992 - Hög ohm

Fler bilder

Detaljer

Siemens Deka Mototron 875cc 110324 FI114992 Spridare

 

Siemens art no: FI114992

 

Siemens Deka Mototron 875cc spricare hög ohm

 

- Dynamiskt flödesmatchade i grupper med 1% tolerans

- Bosch standard modell så passar dom flesta motorer. Dock ej japanska

- Kontakt: Standard Bosch EV1 (Minitimer)

- Resistans: 12 Ohm / Hög ohm

- Statiskt flöde vid 3bar (43.5psi) = 875 cc/min / 80 lb/hr

 

Info från siemens:

 

Genuine Siemens / Mototron DEKA IV ( DEKA 4 ) High Impedance Injectors

These injectors flow 80 lbs/hr at 43.5 PSI ( 3 BAR ) and even more at greater PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

This newly released injector from Siemens is based on the same design as the popular FI114961 60 lb/hr DEKA IV ( DEKA 4 ) injector.


Features:

  • Genuine, reliable Siemens Injectors
  • Excellent response characteristics
  • Robust Design
  • High Impedance
  • Low Impedance performance characteristics with High Impedance Compatibility

Specifications:

  • Static Flow Rate: 80lb/hr = 875 cc/min
  • Dynamic Flow Rate : 18.6 mg/pulse 2.5ms PW, 20 ms Period
  • Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
  • Connector: Minitimer
  • Series: DEKA 4 ( DEKA IV )
  • O-Ring Type: Viton

Cross References:

  • Siemens FI114992
  • Siemens 110324

Mer information

Leveranstid 1-3 dagar
Leverantör Manufacturer
Art. nr. för produkt BAP-0094